Has anyone done this specifically on a ‘73 Ford? To remove the intermediate steering shaft which contains the rag joint (flex coupling), there is one pinch bolt below the joint that disconnects it from the steering box, but I cannot see where it disconnects from the steering column near the firewall somewhere. Any help is appreciated. Thanks!
2 Responses to “How do I remove the rag joint on a ‘73 Mustang?”
Leave a Reply
You will find there are two bolts that connect the coupler to the steering column shaft on the other side of the fabric.You will probably have to loosen the column under the dash so you can gain enough clearance to remove the coupler once it has been unbolted from both sides.Good luck.
You can disconnect from the steering box to pinch bolt.You will find there are two bolts that connect the coupler to the steering column shaft on the other side of the fabric.Thanks……